world concepts machinery

http://www.wcmtissue.com/

laminated V fold tissue towel interfolding machine

The laminated V fold tissue towel interfolding machine is designed to produce laminated V fold tissue hand towel. It mainly suits to two ply virgin pulp tissue paper. It is equipped with two sets of steel to rubber embosser and lamination system. The speed can reach upto 600-800 sheets/min

Folding Unit

1.Size of folding roller 1500mm (width),material is45# steel by coated Cr.

2.Applicable roll quantity: 18~25GSM2plytowel paper

3.Finished product open size:200/210/220/230±2mm X width

4.Finished product folding size100/105/110/115±2mm X width

5. Folding type: V folding

6. Speed of folding: 500~800sheet/min/lane

7. Folding roller is used double air valve structure, material is hard-wearing nylon.

8. Transverse paper-cutting type: the roll of upper cutter is 45#steel, surface is coated by hard Cr..

  upper blade is 1 integral high speed- steel fixed cutter front and back. Material is SKD-II,

  hardness HRC 58~60; Downside blade are 3 integral high-speed cross cutters , hardness HRC

  60~62; Downside cylinder is bearing steel, hardness HRC 58~60,coated hard Cr.

9. Main frame is panel structure, thickness is 50mm.

Lamination Embossing Unit(2 sets)

1.     2 pcs embossing steel roller ,2 pcs rubber roller.

2.     1 pc glue transition roller,1 pc anilox roller,1 pc glue control roller.

3.     1 pcs pressing roller for 2 ply tissue bonding;

4.     Lamination unit will separate from embossing roller while machine is stopped.

5.     Anilox roller keeps rotating while machine stops, prevent the glue from congealed.

6.     1 pc of steel pot for glue.

Unwind Unit

1. Width of parent paper1500mm

2. Max diameter of parent paper1200mm

3.Core inside diameter76.2mm

4. 2 reel unwind standdriving by separate motor.

5.Web tension controlledmanually/motor

6.Parent roll position regulationmanually/motor

7. 2 unwinding shaft , include kinetic taper sleeve and locating sleeve.

8. Panel structure , thickness is 20mm.

Transmission

1.     Transmission are all by gear and T- belt.

Control Unit

1. Speed adjustedwith Touch screeninverter and  PLC ( SIMENS brand.)

2. Counting system punching mark unit and left-right stagger unit          

3. Jogging button and emergency button installed on machine 

Vacuum control:

1.     1 set 22KW  LONGTECH  roots vacuum pump (TAIWAN) .

Air-operated control:

1.Air cylinderair valve are AirTAC.

2.Air pressure> 4kg/cm2 (provided by buyer)

26 other products in the same category: